Please look at my new web page on how to use a wheelchair ramp. There is a video and photos to show how easy this. If you look carefully you will also see our very nosy dog watching!
Putting the wheelchair in the boot
- Position the small wheels above the electric motor so the are clear of the wheelchair ramp sides.
- Use the red handle to engage the motor brake if you have not already done so.
- Switch on the power at the joystick position.
- One hand on the centre of the wheelchair by the footrest and the other on the joystick. Drive the wheelchair up the ramps under power.
- Drive into boot straight and stow … or if the rear seats are up and the space too short follow step 6.
- Switch off the power and turn off the brakes once inside. Turn the wheelchair 90 degrees into position and switch back on the brakes again 9This locks the chair in position and stops it moving when driving).
